Ground Snow and Ice Melting Cables

Thanks to electric heating cables, driveways, paths and even grass areas can be used safely in winter without excessive snow and ice.

Are Ground Snow and Ice Prevention Cables Used by Soldiers?

Pathways, bridges, driveways, exterior staircases, ramps, hospital access roads, and helicopter landing pads require snow and ice removal during winter months to allow people to walk and drive on them. For this challenging task, EHT Engineering offers reliable, electric outdoor heating systems that guarantee the safe melting of snow and ice on surfaces such as concrete, screed, and sand. When energized, they prevent the accumulation of snow and ice on the surface.

How does a ground snow and ice melting system work?

You can install a snow and ice prevention system on the ground, either for the entire area or a specific section. Especially in garages and walkways, 50 cm wide mats are used and operated with 230V or 380V. To prevent snow and ice formation on the ground, a minimum heating power of 300 W/m² should be applied using 30 watt/meter heating cables.
The system consists of heating cables manufactured to withstand outdoor conditions, mounting brackets, sensors that detect moisture and temperature in the ground, and a snow and ice detector that monitors these parameters.

These detectors activate the system as soon as snow and ice begin to form, eliminating the problem before snow and ice formation is even observed, thus providing significant energy savings.

EHT Engineering and Ground Snow and Ice Melting Cables

Smart Heating Solutions for Safe Steps During Winter Months

Winter poses serious safety risks due to snow and ice accumulation on the exterior of buildings. Icing, especially on heavily used surfaces such as ramps, walkways, garage entrances, and in front of hospitals and schools, can lead to dangerous situations such as slipping, falling, and loss of vehicle control. At EHT Engineering, we offer safe, efficient, and long-lasting solutions to both individual and corporate clients with our Ground Snow and Ice Melting Cables, which we have developed to eliminate these risks.

The Source of the Problem: Frozen Ground

The snow that accumulates on the ground after snowfall melts during the day and freezes again at night, forming layers of ice. This cycle:

• Vehicles sliding on ramps
• Falls and injuries on pedestrian walkways
• Water accumulation and freezing at building entrances.
• Cracking and deterioration of floor coverings

This can be the reason. EHT Engineering's underfloor heating systems eliminate these risks, ensuring that outdoor areas can be used safely year-round.

System Components

Ground snow and ice melting systems are an integrated solution consisting of multiple components:

-Heating cables: It is laid underground to prevent the formation of snow and ice.Sensors: It automatically activates the system by sensing ambient temperature and humidity.Snow-ice detector: It activates the system when snowfall begins.Thermostat unit: It manages the system within a specified temperature range.Control panels: It provides manual or automatic system control.Mounting brackets and insulation materials: Ensures safe installation of the cable to the ground and ensures energy efficiency

These components work together to activate the system before snow and ice form, ensuring the ground surface remains at the ideal temperature.

Cable Types and Technical Specifications

At EHT Engineering, we offer two main types of heating cables for ground applications:

1. Series Resistance Heating Cables

• Provides constant power output (typically 30 W/m)
• Produced in specific lengths
• Suitable for concrete, asphalt and under-pavement applications
• Long-lasting and durable
• It can be operated with 230 V or 380 V.

2. Self-Regulating Heating Cables

• Automatically adjusts power output according to ambient temperature
• No risk of overheating
• Provides energy savings
• Can be cut to different lengths and is easy to install
• It is especially preferred on sensitive surfaces.

Both cable types are selected specifically for the site and designed by our expert engineering team.

Application Areas

Ground snow and ice melting systems can be used in a wide variety of fields:

• Garage ramps
• Parking lot entrances and exits
• Loading areas
• Disabled access ramps
• Building entrances and stairs
• Pedestrian crossings and sidewalks
• In front of hospitals and schools
• Helicopter landing areas
• Sports fields and stadiums

These systems can be easily integrated into both new structures and existing floors.

Energy Efficiency and Smart Control

The systems offered by EHT Engineering save energy by activating only when needed. Sensors:

• Ambient temperature
• Humidity rate
• Presence of snow and ice

It automatically runs the system by analyzing data such as:

• Unnecessary energy consumption is prevented
• System life is extended
• Operating costs decrease
• Environmental sustainability is ensured

Since the system operates completely automatically, it does not require intervention and the need for maintenance is minimal.

Installation and Technical Support

At EHT Engineering, we offer turnkey services for ground snow and ice melting systems:

• On-site discovery and needs analysis
• Project-based engineering design
• Product supply and assembly
• Testing and commissioning
• User training and technical documentation
• Periodic maintenance and 24/7 technical support

During the installation process, cable routes, junction boxes, and control panels are planned specifically for the site. All applications are documented and inspected in accordance with international standards.

Material Quality and Durability

Cables and equipment we use:

• UV resistant
• Protected against water and moisture
• Resistant to mechanical impacts
• It has a long-lasting and maintenance-free structure.

Thanks to these features, our systems operate smoothly even in the harshest winter conditions.

Assurance of EHT Engineering

Ground snow and ice melting systems are a critical investment not only for comfort but also for safety and structural integrity. As EHT Engineering, we...

• We select products specifically for sectoral needs.
• We offer internationally certified products
• We provide project support with our experienced engineering staff.
• We provide post-implementation technical support and maintenance services.

This ensures that our clients' structures remain safe and usable without problems, even during the winter months.

In conclusion, At EHT Engineering, our Ground Snow and Ice Melting Cables are not just a technical product; they are also an integrated solution offering safety, energy efficiency, and sustainability. With project-specific design, high quality standards, and expert engineering support, we continue to produce solutions that exceed our customers' expectations.